3M™ Heat Shrink Thin-Wall Flexible Polyolefin Adhesive-Lined Tubing EPS300-3/16-48"-Black-250 Pcs, 48 in length sticks, 250 pieces/case
- Part Number EPS300-3/16-48"-Black-250 Pcs
- 3M ID 7000133613
Details
Highlights
- Dual-wall construction provides abrasion resistance and moisture-seal protection
- Offers the advantage of integral, adhesive-lined construction
- Offers protection for automotive, truck, electronic components, wire splices, wire bundles and harness breakouts
- Expanded I.D. of 3/16 in
- 4-ft stick
- Made of black flexible polyolefin
- Withstands temperatures of -67 to 230 degrees F (-55 to 110 degrees C)
- Flame-retardant tubing is rated for 600V applications
- UL Listed, ABS, CSA Certified and RoHS 2011/65/EU Compliant
- 250 sticks/case
3M™ EPS-300 Heat Shrink Tubing is a dual-wall tubing provides the advantage of an integral, adhesive-lined construction. This flame-retardant tubing with a 3:1 shrink ratio offers insulation for 600V-rated applications. The flexible polyolefin construction features an internal layer of thermoplastic adhesive, which offers moisture-seal protection in automotive and marine applications.
3M™ Heat Shrink Tubing EPS-300 is color-coded for quick and easy identification of the wire. It provides a skintight fit and strain-relief protection for electronic components, wire splices, wire bundles and harness breakouts. This flame-retardant tubing has a heat shrinkable outer wall that is irradiation cross-linked for abrasion resistance and helps to maintain the high flow as well as superior adhesion characteristics. When the tubing cools down, it forms a permanent, water-resistant barrier. It withstands a wide temperature range of -67 to 230 degrees F (-55 to 110 degrees C). UL Listed, CSA Certified and RoHS 2011/65/EU Compliant.
Typical Properties
| Brands | 3M™ |
| Dielectric Strength (V/mil) | 500 V/mil |
| Elongation | 450 Percent |
| Expanded Inner Diameter (metric) | 4.8 mm |
| Flame Retardant | Yes |
| Flammability Rating | UL 224 All Tubing Flame Test [jacket] |
| Heat Shrink Type | Adhesive-Lined Polyolefin Heat Shrink Tubing |
| Inner Diameter After Shrink (Metric) | 1.57 mm |
| Inner Diameter Before Shrink (Metric) | 4.75 mm |
| Material | Polyolefin |
| Maximum Operating Temperature (Celsius) | 110 ℃ |
| Minimum Expanded Tubing I. D. | 0.187 in |
| Non-Corrosive | Yes |
| Operating Temperature (Celsius) | -55 °C to 110 °C |
| Operating Temperature Range (Celsius) | -55 °C to 110 °C |
| Product Color | Black |
| Recovered Inner Diameter (metric) | 1.6 mm |
| Shrink Ratio | 3:1 |
| Solution for | Wireless Network: Infrastructure Accessories, Access Network: xDSL, Access Network: FTTH/FTTB/CATV |
| Tubing Type | Dual Wall (Adhesive Lined) |
| UL File Number | E-157227 |
| Units per Case | 250.0 |
Similar products
| Brands | 3M™ | |||
| Dielectric Strength (V/mil) | 500 V/mil | |||
| Elongation | 450 Percent | |||
| Expanded Inner Diameter (metric) | 4.8 mm | |||
| Flame Retardant | Yes | |||
| Flammability Rating | UL 224 All Tubing Flame Test [jacket] | |||
| Heat Shrink Type | Adhesive-Lined Polyolefin Heat Shrink Tubing | |||
| Inner Diameter After Shrink (Metric) | 1.57 mm | |||
| Inner Diameter Before Shrink (Metric) | 4.75 mm | |||
| Material | Polyolefin | |||
| Maximum Operating Temperature (Celsius) | 110 ℃ | |||
| Minimum Expanded Tubing I. D. | 0.187 in | |||
| Non-Corrosive | Yes | |||
| Operating Temperature (Celsius) | -55 °C to 110 °C | |||
| Operating Temperature Range (Celsius) | -55 °C to 110 °C | |||
| Product Color | Black | |||
| Recovered Inner Diameter (metric) | 1.6 mm | |||
| Shrink Ratio | 3:1 | |||
| Solution for | Wireless Network: Infrastructure Accessories, Access Network: xDSL, Access Network: FTTH/FTTB/CATV | |||
| Tubing Type | Dual Wall (Adhesive Lined) |
3M™ Heat Shrink Thin-Wall Flexible Polyolefin Adhesive-Lined Tubing EPS300-3/16-48"-Black-250 Pcs, 48 in length sticks, 250 pieces/case
3M™ Heat Shrink Heavy-Wall Cable Sleeves ITCSN
3M™ Heat Shrink Medium-Wall Cable Sleeves IMCSN for 1 kV
3M™ Heat Shrink Heavy-Wall Flame-Retardant Cable Sleeves HDT for 1 kVLegal disclaimer
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
