3M™ Cold Shrink QS-III Splice Kit 5787A-MT, Tape Shielded, Wire Shielded, Unishield®, Longitudinally Corrugated, 25/28 kV, 250-750 kcmil (120-325 mm2), 1 per case
- Part Number 5787A-MT
- 3M ID 7000140750
Details
Highlights
- Splices shielded cables
- Silicon rubber-splice body provides good high- or low-temperature performance and Armorcast™ jacket offers mechanical protection
- Suitable for use with 10000 and 20000 Series connectors or other UL Listed inline compression connectors
- Solderless ground braid offers constant force spring connection
- 1.07 to 1.7-in O.D. insulation
- Accommodates wire size of 250 to 750 kcmil
- Rated for 25/28 kV applications
- Includes 3 cold shrink adapter tubes and splice bodies, 6 tubes of P55/R compound, gloves, 1 roll Scotch® electrical shielding tape 24 and more
- IEEE Approved
- 1 kit/case
3M™ 5787A-MT Series Cold Shrink QS-III Inline Trifurcating Cable Splice Kit is designed for splicing 25/28 kV shielded power cables. The cold shrink design ensures a quick installation and excellent cable size transitions. This armored or non-armored splice kit is perfect for use in cable trays, cable racks, junction boxes and cable hangers, as well as aerial and wet or dry locations.
3M™ 5787A-MT Series Cold Shrink QS-III Inline Cable Splice Kit includes 3 metallic shield sleeves, 6 small constant force springs, 3 cold shrink adapter tubes, 5 rolls of vinyl electrical tape Super 88 and more. This cable splice kit uses constant force springs for connecting ground braid jumpers and Armorcast™ for replacing the cable armor and/or jacket. The splice body has a specially formulated silicone rubber construction to ensure optimal high- and low-temperature performance. This splice kit is suitable for use with solid dielectric cables such as XLP, XLPE, EPR and more. IEEE Approved.
Suggested applications
- For inline splicing
- For armored and non-armored cables
- For 35 kV rated cables
- For cable conductor size range of 1/0 AWG to 1000 kcmil
- For use with solid dielectric cables; XLP, XLPE, EPR, etc
- For indoor and outdoor applications: Cable Tray; Cable Rack; Cable Hangers; Junction Box; Aerial; and Wet or dry locations
Typical Properties
Legal disclaimer
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
