3M™ PILC Accessory Oil Stop Kit 5113-OS, 15-25/28 kV
- Part Number 5113-OS
- 3M ID 7100057989
Details
Highlights
- Seals the oil inside the paper-insulated, lead-covered cable
- Environmentally seals the accessory end, as well as the cable jacket
- Offers 1.1-in minimum insulation diameter over PILC
- Seals PILC cables sized 350 to 1000 kcmil rated at 15 to 25/28 kV
- Rated for 200 amps applications
- IEEE Approved
- 1/case
3M™ PILC Accessory Oil Stop Kit is specifically designed to seal the oil inside the paper-insulated, lead-covered cable. The kit offers an accessory ground lead and it environmentally seals the accessory end, as well as the cable jacket.
3M™ PILC Accessory Oil Stop Kit contains all the necessary accessories that are required for sealing PILC cables. It includes a cold shrink oil-stop tube, cold shrink jacket tube, white restricting tape, Scotch® 130C rubber tape, Scotch 13 semi-conducting tape, a ground lead with accessory bleed wire and mastic seal strips. IEEE Approved.
Typical Properties
Legal disclaimer
Manufacturing Origin: USA
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
